{ Begin element file: C:\ROBOT\LCDPANL.OUT }  ENTER 
    1.7375        0.5          0      -1.7375        0.5          0      1    1    0    0
   -1.7375        0.5          0      -1.7375       -0.5          0      1    1    0    0
   -1.7375       -0.5          0       1.7375       -0.5          0      1    1    0    0
    1.7375       -0.5          0       1.7375        0.5          0      1    1    0    0
     2.125      0.575          0        2.125      0.575          0      1    1    0    0
     2.125     -0.575          0        2.125     -0.575          0      1    1    0    0
    -2.125     -0.575          0       -2.125     -0.575          0      1    1    0    0
    -2.125      0.575          0       -2.125      0.575          0      1    1    0    0
0 0 0  0 0 0  0 0 0 0  { END ENTER } 
 
LET |LASTELEN -> ELEMENTS { This is here if you want to use the old center. } 
# |LASTELEN CENTER          0          0          0  { Center point values of element when saved. } 
RELEASE |LASTELEN { This ASCII file can be loaded with RUN or LOAD ASCII } 
{ If you use RUN the center will be restored, if LOAD ASCII it will not be. }