{ Begin element file: C:\ROBOT\LCDMOD\IOMOD2\LCDKEYIO.BTN }  ENTER 
     -1.35      -0.55          0        -1.35      -0.55          0      1    1    0    0
      -1.1      -0.55          0         -1.1      -0.55          0      1    1    0    0
        -1      -0.55          0           -1      -0.55          0      1    1    0    0
     -0.75      -0.55          0        -0.75      -0.55          0      1    1    0    0
     -0.65      -0.55          0        -0.65      -0.55          0      1    1    0    0
      -0.4      -0.55          0         -0.4      -0.55          0      1    1    0    0
      -0.3      -0.55          0         -0.3      -0.55          0      1    1    0    0
     -0.05      -0.55          0        -0.05      -0.55          0      1    1    0    0
      0.05      -0.55          0         0.05      -0.55          0      1    1    0    0
       0.3      -0.55          0          0.3      -0.55          0      1    1    0    0
       0.4      -0.55          0          0.4      -0.55          0      1    1    0    0
      0.65      -0.55          0         0.65      -0.55          0      1    1    0    0
      0.75      -0.55          0         0.75      -0.55          0      1    1    0    0
         1      -0.55          0            1      -0.55          0      1    1    0    0
       1.1      -0.55          0          1.1      -0.55          0      1    1    0    0
      1.35      -0.55          0         1.35      -0.55          0      1    1    0    0
0 0 0  0 0 0  0 0 0 0  { END ENTER } 
 
LET |LASTELEN -> ELEMENTS { This is here if you want to use the old center. } 
# |LASTELEN CENTER          0          0          0  { Center point values of element when saved. } 
RELEASE |LASTELEN { This ASCII file can be loaded with RUN or LOAD ASCII } 
{ If you use RUN the center will be restored, if LOAD ASCII it will not be. }